5 Star Reviews ⭐️
Honest Upfront Pricing
No Hidden Fee’s
Experienced & Professional
💧 Bore Pump Repairs Perth
⚡ Fast Bore Pump Fault Finding & Repairs
💧 No Water? ⚡ Pump Tripping Power? ✅ Same Day Service
Fast fault finding and repairs to get your reticulation system back up and running fast.
Perth's Bore Pump Repair Specialists.
✅ Upfront Pricing
✅ No Call-Out Surprises
✅ Free Bore Health Check
✅ Licensed Perth Electricians
⚡ Bore Pumps Tripping Power
🔌 Motor Overloads & Electrical Faults
📱 WiFi Reticulation Controllers
✅ Check Valves & Solenoid Valves
🚿 No Water To Reticulation Systems
🔥 Burnt Out Bore Pump Motors
🛡️ Insurance Repair Work
💧 Bore Bacteria Treatment Solutions
⭕ Iron Oxide & Bore Staining Issues
🔧 Common Bore Pump Problems We Repair
⭐ Trusted Bore Pump Repairs Perth
Verlek Electrical specialises in fast, reliable bore pump repairs across Perth.
Whether your bore pump is tripping power, not starting, or supplying no water to your reticulation system, we provide expert fault finding and same-day repair solutions.
Every repair includes honest advice, upfront pricing, and a free bore health check. Our workmanship is backed by a 12-month warranty, giving you confidence that the job is done right the first time.
✅ Same Day Service Available
✅ Free Bore Health Check
✅ 12-Month Workmanship Warranty
✅ Upfront Pricing
✅ Licensed Perth Electricians
We Provide Rapid Bore Pump Repairs To Many Brands Including:
-
Lowara
-
Davey
-
Onga
-
Orange
-
Pedrollo
-
And Many More!
All Repairs Are Covered By Our 12 Month Warranty Plan
For more information on Water Bores check out our Blog post Here - What's Wrong With My Bore Pump : Everything You Need to Know
 Submersible Bore Pump Repair |  Davey Three Phase Installation |  New Centrifugal Bore Pump |
|---|---|---|
 Motor Overload Contactor |  Davey Bore Pump |  Bore Pump Repairs Perth |
Frequently Asked Questions ❓
⚡ Why Is My Bore Pump Tripping Power?
A bore pump that repeatedly trips the power is usually a sign of an electrical or mechanical fault within the system. Common causes include a burnt-out motor, failed capacitor, seized bearings, water ingress into the motor, damaged underground cabling, or an electrical overload condition.
Other possible causes include:
-
🔥 Burnt-out bore pump motor windings
-
⚙️ Seized or worn motor bearings
-
💧 Water ingress causing short circuits
-
🔌 Damaged underground power cables
-
⚡ Electrical overload or overcurrent faults
-
🔄 Single phasing or phase imbalance (3-phase systems)
-
📉 Low voltage supply issues
-
📦 Faulty control boxes or bore pump controllers
-
🛡️ Faulty circuit breakers or protection devices
-
🌿 Pump impellers jammed by debris or mineral build-up
-
🚿 Excessive pump load due to blocked pipework or failed check valves
💧 Why Is My Bore Pump Running But Not Producing Water?
If your bore pump is running but no water is reaching your reticulation system, there are several possible causes. Some faults are electrical, while others are caused by mechanical failures or blockages within the bore system.
Common causes include:
-
🚿 Faulty or leaking check valves
-
⚙️ Worn or broken pump impellers
-
🌿 Blocked filters or pipework
-
🏖️ Sand contamination causing pump wear
-
💧 Air leaks on the suction side of the system
-
🔄 Loss of prime in the pump
-
📉 Low water levels within the bore
-
🔧 Damaged pipework or fittings underground
-
🚰 Blocked reticulation lines or valves
-
⚡ Motor running but not driving the pump correctly
At Verlek Electrical, we carry out comprehensive bore pump fault finding to identify the exact cause of the problem before recommending repairs. In many cases, the issue can be repaired without replacing the entire bore pump system, saving you unnecessary expense.
✅ Fast Fault Finding
✅ Upfront Pricing
✅ Same Day Service Available Across Perth
FREE No Obligation Inspection / Quotation